Micropulleys

By combining a compact rigging plate with a pulley, DMM produced a highly efficient tripple attachment pulley that completely streamlines your clim...

The PINTO pulley is a work of art! Designed to be completely rope friendly by polishing all the sides to smooth soft edges and making all parts of ...

Aluminum micropulley features fixed side plates that work great with the stiff tether on the new rope wrench. MBS: 24kN (5,395 lbs) MBS: 5,395lbs ...

This is one of our most popular micropulleys. Great multi use micropulley for ropes up to 1/2”. Works very well for slack tending and fairlead cont...

Small swing cheek pulley works great as a slack tender. For ropes up to 1/2”. MBS: 35kN (7,840 lbs)

Spacer for PINTO Pulley or PINTO Rig Pulley

The Petzl Roll Clip Tri-Act Lock features a pulley sheave attached to a locking carabiner making an awesome light rigging redirect, climbing redire...

The Fixe micropulley has fixed side plates and a self lubricating bushing for maximum efficiency. MBS: 23kN (5,000 lbs); WLL: 5kN (1,100 lbs)

The Petzl Mobile pulley is a small lightweight micro pulley is compatible with all shapes and sizes of carabiners. Can use rope size up to ½” or 13...

Pulley-carabiner that facilitates installation on anchors and devices ROLLCLIP Z is a pulley-carabiner with a gate opening on the non-pulley side t...

The eccentric geometry and fully-featured design of the Hitch Climber Eccentric is an evolution for the classic Hitch Climber system. It will advan...

The CT Micropulley has fixed sideplates and is ideal for use with the Rope Wrench and stiff tether. By inserting the stiff tether into the center o...

The DMM PINTO Rig Pulley is a slightly larger and more efficient version of the PINTO. With a larger diameter sheave the Rig is around 95% efficien...

We have created this ready-to-use package based on the efficient Hitch Climber Eccentric. The Hitch Climber Eccentric has evolved from the popular...

The Petzl Roll Clip features a pulley sheave attached to a carabiner allowing for light rigging redirects, climbing redirects, or an awesome speedl...

The prussic minding pulley is designed for heavy duty rigging, rescue, and hauling systems. Equipped with bushings for high loads at low speeds. M...

The Omni Block features a pulley with an attached swivel designed to reduce overall vertical height. Double locking mechanism maximizes safety. Lar...

The Revolver carabiners offer a unique pulley sheave at one end of the carabiner to use for mechanical advantage systems, speed lines, and hauling ...

This single pulley with pivoting sides features a large diameter sheave for more efficiency while letting ropes move over the pulley. Self lubricat...

The Omni Block features a pulley with an attached swivel designed to reduce overall vertical height. Double locking mechanism maximizes safety. Lar...

The Phlotich pulley is a multi-aperture device specifically designed for SRT and DdRT climbing systems.  Rope Size (maximum): 13mm (1/2") MBS: 30kN...

The Revolver carabiners offer a unique pulley sheave at one end of the carabiner to use for mechanical advantage systems, speed lines, and hauling ...

DMM's Revolver Rig is a connector with an integrated pulley sheave. It features a high efficiency roller bearing sheave(s), threaded removable cap...

The eccentric geometry and fully-featured design of the Hitch Climber Eccentric is an evolution for the classic Hitch Climber system. It will adva...

This in-line double sheave aluminum pulley works great for speedlines or haul lines where efficiency is key. Large central connection point is larg...

This small redirect pulley from ISC is designed for use on rope from 10mm to 13mm. It helps manage friction more consistently and ensure a smooth ...

Sealed bearings and aluminum construction make this lightweight pulley a must have. For ropes up to 1/2”. MBS: 36kN (8,000 lbs); WLL: 8kN (1,770 lbs)

The Revolver carabiners offer a unique pulley sheave at one end of the carabiner to use for mechanical advantage systems, speed lines, and hauling ...

The eccentric geometry and fully-featured design of the Hitch Climber Eccentric is an evolution for the classic Hitch Climber system. It will advan...

An evolution of the Triple Attachment Pulley first brought to the market 10 years ago by DMM. The hot forged swing-cheek pulley with an in-built th...

The hot forged swing-cheek pulley with an in-built three hole rigging plate allows creative configurations and enables direct connection to textile...

DMM's Revolver Rig is a connector with an integrated pulley sheave. It features a high efficiency roller bearing sheave(s), threaded removable cap...

DMM's Revolver Rig is a connector with an integrated pulley sheave. It features a high efficiency roller bearing sheave(s), threaded removable cap...

The Omni-Block SwivaBiner combines a swiveling carabiner and pulley into one tool.  Incorporating a sideplate that opens while the pulley is still ...

DMM's Revolver Rig is a connector with an integrated pulley sheave. It features a high efficiency roller bearing sheave(s), threaded removable cap...