Petzl SEQUOIA Arborist Harness – CE EN 813, ANSI Z133, ASTM F887 (C069AB)
The Petzl SEQUOIA is a comfortable, well-supported arborist sit harness built for tree care professionals who need a reliable balance of comfort, support, and convenience. Wide and rigid waistbelt and leg loops with sculpted 3D foam padding provide all-day support during suspended work, while FAST opening buckles and DOUBLEBACK buckles with anti-slip device make donning and adjustment fast and secure. Wide front attachment points accept up to two attachment bridges and are compatible with ZILLON or MICROFLIP positioning lanyards. Certified to CE EN 813, CE EN 358, ANSI Z133, ASTM F887, and CSA Z259.1. Available in Sizes 0, 1, and 2.
Key Features
- Wide and rigid waistbelt and leg loops — optimal support throughout the workday for suspended tree care work
- 3D foam padding — sculpted, breathable contact zones for all-day comfort during prolonged suspension
- FAST opening buckles — waistbelt FAST buckle for quick don/doff without loss of adjustment, even with gloves; triple-action FAST buckles on leg loops to limit accidental unfastening
- DOUBLEBACK buckles with anti-slip device — setback adjustment stays in place once set
- Wide front attachment points — accept up to two attachment bridges; compatible with ZILLON or MICROFLIP positioning lanyards; supports RING and SWIVEL connection options
- Mobile side attachment points — follow lanyard orientation during movement for natural positioning
- SRS compatible — complete KNEE ASCENT kit can be installed on the waistbelt for efficient SRS rope ascent
- Six equipment loops on waistbelt — plus four CARITOOL tool holder slots on the waistbelt and two on each leg loop for organized tool carry
- Textile attachment points — upper waistbelt accepts SEQUOIA shoulder straps or other shoulder straps; rear buckle and RING M on bridge allow TOP chest harness installation to convert to full-body harness
- FIRSTAID pouch compatible — dedicated slot on rear of waistbelt; elastic band included for alternative kit attachment
- Chainsaw leash connection point — textile connection point on waistbelt
- Seat compatible — front D-rings accept a seat via shackles (not included) for prolonged suspension comfort
- Broad certification coverage — CE EN 813, CE EN 358, ANSI Z133, ASTM F887, CSA Z259.1, GB 6095:W
Sizing
| Reference | Size | Waist Belt | Leg Loops | Weight | Guarantee |
|---|---|---|---|---|---|
| C069AB00 | 0 | 65–80 cm | 44–59 cm | 1,800 g | 3 years |
| C069AB01 | 1 | 70–93 cm | 47–62 cm | 1,860 g | 3 years |
| C069AB02 | 2 | 83–120 cm | 50–65 cm | 2,005 g | 3 years |
Specifications
| Attribute | Detail |
|---|---|
| Attachment Points | Attachment bridge, attachment points, side attachment points |
| Certifications | CE EN 813, CE EN 358, ANSI Z133, ASTM F887, CSA Z259.1, GB 6095:W |
| Materials | Nylon, polyester, polyethylene, aluminum, steel |
| Equipment Loops | 6 on waistbelt |
| CARITOOL Slots | 4 on waistbelt, 2 on each leg loop |
| Guarantee | 3 years |
| Sizes Available | 0, 1, 2 |
*First Aid pouch not included
SEQUOIA vs. SEQUOIA PLUS — Which is Right for You?
- SEQUOIA (C069AB) — Broader certification coverage (ANSI Z133, ASTM F887, CSA Z259.1); KNEE ASCENT kit installable via waistbelt; ideal for arborists who need multi-standard compliance
- SEQUOIA PLUS (C069BB) — Integrated SRS ascent system with dedicated tube and elastic band for KNEE GRAB; extra wide and rigid waistbelt and leg loops; gated front attachment points; lighter weight per size
Quick Decision Guide
- Need ANSI Z133 or ASTM F887 certification? — The SEQUOIA (C069AB) carries these certifications; the SEQUOIA PLUS does not list them
- Want to use SRS technique? — The SEQUOIA supports KNEE ASCENT kit installation; for a fully integrated SRS system, consider the SEQUOIA PLUS
- Need a ZILLON or MICROFLIP positioning lanyard? — The wide front attachment points accept these directly
- Need to carry a lot of tools? — 6 equipment loops and 8 CARITOOL slots (10 total) provide extensive organized carry capacity
- Not sure which size? — Use the sizing table above; measure your waist and leg circumference and match to the range for your size
Frequently Asked Questions
What certifications does the Petzl SEQUOIA hold?
The SEQUOIA is certified to CE EN 813, CE EN 358, ANSI Z133, ASTM F887, CSA Z259.1, and GB 6095:W — broader certification coverage than the SEQUOIA PLUS.
Can the SEQUOIA be used with SRS technique?
Yes — the complete KNEE ASCENT kit can be installed on the waistbelt to increase efficiency when using SRS technique. For a fully integrated SRS system with a dedicated tube and elastic band, see the SEQUOIA PLUS.
How many tool slots does the SEQUOIA have?
The harness features 6 pre-shaped equipment loops on the waistbelt, plus 4 CARITOOL tool holder slots on the waistbelt and 2 on each leg loop — 10 CARITOOL slots total.
Can the SEQUOIA be converted to a full-body harness?
Yes — the TOP chest harness can be installed using the plastic buckle at the rear of the waistbelt and the RING M on the bridge.
What is the guarantee on the SEQUOIA?
Petzl offers a 3-year guarantee on all sizes of the SEQUOIA.
Which size should I choose?
Measure your waist and leg circumference and match to the sizing table: Size 0 fits waist 65–80 cm / legs 44–59 cm; Size 1 fits waist 70–93 cm / legs 47–62 cm; Size 2 fits waist 83–120 cm / legs 50–65 cm.